6
Momentum shredding capability
CAN shred the following:
• Stapled paper, 1 inch / 25 mm within the corner
• Small sized paper
• Paperclippped paper, 1 inch / 25 mm within the corner
• Capable of shredding small/medium paperclips
(max. wire thickness = .035 inches / .9 mm)
• <80/100gsm paper
CANNOT shred the following:
Magazines or other
documents bound by
multiple staples or clips.
Adhesive labels.
Large clips. Check the
length of the paperclip is
not longer than 1.25 inches
/ 32 mm.
Heavy duty staples. Check the
staple leg length is not greater
than .23 inches / 6 mm.
Plastic sheets, laminated
documents, plastic
folders.
Warning! Never shred CDs
in the paper feed slot.
No aerosols
No oil
Bound documents
Binder clips
Lubrication of the shredder
GBC recommends using an oil sheet after the bin has been
emptied three times (and every three bin emptying after this).
Bin full
When the bin is full the shredder will not function and the bin full
symbol will illuminate and flash red.
When this happens you must empty the bin.
Pull out the bin to empty.
Once the bin is empty, push it back in and press the On button to
resume shredding.
WARNING:
The shredder bin must be fully pushed closed
for the machine to operate.
• Empty the shredder bin when it is full otherwise the
shredder’s performance will be adversely affected.
Operating the shredder with a full shredder bin can result
in paper jamming in the cutters, which will increase the
machine’s noise level.
• Do not force down shredder paper in the bin using
your feet.
Door open
If the door is opened during shredding as a safety precaution the
shredder will instantly stop, and the door open symbol on the
indicator panel will flash red.
To resume shredding, shut the door and press the
button.
WARNING
• The shredder DOOR must be fully pushed closed for the
machine to operate.
Thick paper or card
<200gsm
Glossy paper or a sheet
covered with print on both
sides.
Warning! Only shred CD in
machines with a separate
CD shredding slot.
Содержание M12-12
Страница 3: ......