Operation, hot lamination
1
2
3
4
5
6
7
8
Reverse Button
Operation, cold lamination
1
2
4
3
Laminating Tips
Connect power cord to appropriate power source.
Push the power button to turn the power “ON” (fig. A).
Select the button for the appropriate pouch gauge
thickness and material you are laminating. The indicator
glows (fig. B).
The laminator will pre-heat for approximately 4-6 minutes.
When the required temperature is reached the laminator
NBDIJOFXJMMCFFQUXJDFBOEUIF-&%JOEJDBUPSBUUIF
laminating entrance will turn from red to green (fig. C).
Centre the item to be laminated within the pouch left to
right with the top edge against the sealed edge of the
QPVDI mH%
Insert the pouch with the sealed edge first into the
machine (fig. E).
The laminated item will automatically exit at front of the
machine. After the pouch has stopped moving,
immediately place it on a flat surface to cool for one
minute before handling (fig. F).
If you have finished laminating, push the power button to
turn off the machine (fig. A).
NOTE: DO NOT LAMINATE AN EMPTY POUCH.
C
onnect power cord to appropriate power source.
Push the power button to turn the power “ON” (fig. A).
Cold laminating is the default setting.
Once cold lamination is ready the machine will beep twice
BOEUIF-&%JOEJDBUPSBUUIFMBNJOBUJOHFOUSBODF
will turn
from red to green (fig. C).
Use and laminate your cold pouch.
CAUTION: If you have just done hot lamination,
turn the machine off and on again and wait for the
LED indicator at the entrance to turn green before
attempting to do cold lamination.
1
2
Press the auto reverse button. This will reverse the
rotation of the rollers allowing the pouch to exit the front
of the machine.
After removing the pouch press the auto reverse button to
resume laminating.
CAUTION:
Be careful when removing the
laminated pouch from the machine. It may be hot.
In the event of a misfeed or a jam follow these instructions.
t%0/05-".*/"5&"/&.15:106$)
t/FWFSJOTFSUUIFMPPTFFOEPGUIFQPVDIJOUPUIFNBDIJOFmSTU
This could cause the machine to jam.
t#FGPSFMBNJOBUJOHJNQPSUBOUPSVOJRVFEPDVNFOUTBMXBZTSVO
a test pouch through the laminator using a similar type of
document.
t%POPUBUUFNQUUPEPTJOHMFTJEFEMBNJOBUJPO5IJTXJMMEFTUSPZ
the laminator.
t"TTPPOBTIPUMBNJOBUJPOJTDPNQMFUFESFNPWFUIFMBNJOBUJPO
from the front of the machine and place on a cool flat surface
for cooling to prevent the pouch from curling.
t%POPUCMPDLUIFWFOUTMPUTUIJTXJMMDBVTFUIFMBNJOBUPSUP
overheat.
t%POPUDVUQPVDIFTQSJPSUPMBNJOBUJPO
Содержание GBC CLA303H
Страница 1: ...CLA303H Pouch Laminator Instruction Manual...
