GBC Fusion 5000L, Инструкция по эксплуатации

Страница: 5 / 14

3
Technical Specifications
Electrical
Machine
Dimensions
Machine Weight
Maximum
Pouch Width
Maximum
Pouch Thickness
Maximum Thru-put
Thickness
Warm-Up Time
Speed
220-240V AC / 50Hz-
60Hz / 6.5A / 1520W
570x193x132
mm
4.6
kg
303
mm
2 x 250 micron
(total 500)
1.0
mm
Approximately
1 minutes
Variable
(
max
.: 1000
mm /min
.)
• Maximum A3 document
pouch 426 x 303mm on
GBC Fusion 5000L A3
Laminator
• Active anti jam feature
may not detect issue on
smaller items
• Failure to comply will
result in damage and
invalidate guarantee
Service
Do not attempt to service
or repair the pouch laminator
yourself. Unplug the unit
and contact an authorised
GBC service representative
for any required repairs.
Getting Ready to Laminate
Easy Set Up
1. Remove the plastic exit tray
from the box and place into the
two holes on the back of the
laminator and extend to use.
Ensure that there is sufficient
space behind the laminator for the
item to be removed
2. Take the electrical plug and
place in an appropriate power
source, which is near the table you
intend to use.
3. The laminator will briefly flash
the GBC logo on the control panel
and will make an audible beep.
Interactive User Display
1. To use the laminator gently tap
the ‘power on’ button. A sequence
of lights will cross the control panel.
NOTE: Your new laminator may emit a
slight odour during the initial operation. It is
normal and will diminish after a few hours
of operation.
5. If 75mic is not the pouch
thickness you want to select,
using the arrows scroll until the
required pouch thickness setting
is shown and press “Enter”.