GBC 2064
Operation Manual
© 2006 General Binding Corporation
Page 12
S. PICO Safety System:
(Fig.10S)
The Patented PICO Safety System utilizes 2
fiber optic beams located at the Main Roll
Nip as well as the Pull Roll Nip. Once the
Optical Eye is blocked, the machine will
instantly stop unless the operator is using the
Foot Switch. While using the Foot Switch and
the Optical Eye is blocked, the machine will
only operate at a fixed speed of 3ft/mn.
Please refer to the Sequence of Operation
Chart on Page #14 Diagram 1.
T. On Off Switch:
(Fig. 11T) To apply Main
Power to the Laminator, Press the switch to
the “ON” Position. To disconnect Main
Power to the Laminator, press the switch to
the “OFF” position.
U. Fuses:
(Fig. 11U)
There are 4 fuses. Each one is labeled to
describe each fuses function.
V. Main Power Cord:
(Fig. 12V)
The Main Power Cord Plugs into the Main
Power Supply. See Power Requirements in
the Specs part of the manual for required
Voltage and Amperage.
W. Foot Switch:
(Fig.12W)
The Foot Switch allows the operator to run
the machine hands free. When the PICO
System is not blocked, the Foot Switch will
activate the Main Rollers, and the machine
will run at the set speed on the Main Control
Panel. The Speed can be adjusted by
selecting the Speed button and using the Main
Dial to increase or decrease speed while unit
is running.
S
Figure 10
Figure 11
T
U
V
W
Figure 12
