GBA
Global Bill Acceptors
GBA ST2
Operations Manual
Page 6 of 25
Astrosys International Ltd
January 2009
GBA ST2 Op Manual V1.01
3.0 MECHANICAL CONFIGURATION
3.1
Faceplate and Bezel Fitting / Removal
Refer figure 3.1.1
To remove the faceplate / bezel, gently push the two purple bezel retainer buttons inwards until
they are in contact with the validator. With these depressed, pull on the faceplate / bezel to
remove from its locking stage. To fit the faceplate / bezel, simply insert the two black locating legs
into the holes and push fully until you hear a loud clipping sound. Pull fully on the faceplate / bezel
to ensure correct fitment.
3.1.1 - Images of faceplate fitment
3.1.2 - Image of note guide fitting
3.1.2 Note Guide Fitting / Removal
Refer figure 3.1.2
To remove the note guide first remove the faceplate / bezel. Push together the two sides of the
note guide and pull away from the validator. To fit the note guide, please ensure that the four pins
locate fully into the four connection holes, then push the note guide so the clips are secure.
3.1.3 Note Guide Plate Fitting / Removal
3.1.3 – Image of note plate fitting
The note guide uses note guide plates to aid insertion of the notes inserted. As listed above, these
are available in a number of sizes, dependant on currency required. To remove these from the
GBA ST2 you will first need to remove the note guide as per 3.1.2. To remove the plates, push
down on the side of the plate and (if looking at side of note guide) twist it away from the note guide.
To refit the note plate, insert the two location legs into the holes and push down.