GBA Global Bill Acceptors
GBA ST1C Operation Manual
Page 6 of 30
Astrosys International Ltd
GBA ST1C Operations manual V1_4
2.2.1 Cassette Fitting / Removal
To fit a note cassette to the GBA ST1C validator, ensure that the cassette lid is level with purple
cassette clip of the GBA ST1C body. Line up the four cassette locating studs with the four location
slots in the channel and push the cassette firmly towards the validator body. The studs will locate
into the joints. To ensure that the cassette latch has successfully re-engaged, press down on the
cassette lid. Remove the cassette by sliding the cassette clip forwards (away from the cassette)
and lifting the cassette away from the GBA ST1C unit.
2.2.1 Cassette removal
2.2.2 Cassette
Currently available cassette option holds 300 notes. The cassette has the option to be locked for
security using two cam locks. To access the bills squeeze two tabs as shown below.
2.2.2 Cassette 300 (fitted as standard)
2.2.2 Image of Cassette open
Squeeze two tabs and pull
back to open the cassette
and remove stacked bills
