background image

 

MIUM0001_REV01_ RKB_20140130 MIUM ENG.docx 

 

Dear Customer, 
 
Thank  you  for  having  purchased  an  LMF  product.  It  is  the  result  of many  years  of  experience,  research  and has  been 
made with top quality materials and highly advanced technologies. The CE mark guarantees that the machine meets the 
European Standards regarding safety. 
The  qualitative  level  is  kept  under  constant  surveillance.  LMF  products  therefore  offer  SAFETY,  QUALITY  and 
RELIABILITY. 
 
Thank you once again for your preference. 
 

The manufacturer declines all responsibility for any inaccuracies in this manual due to printing or typing errors. 
The manufacturer reserves the right to modify the products contents in this catalogue without previous notice. 

 
 
 
 
 
 

DECLARATION OF CONFORMITY

 

 
 
 
 
 
The Legal Representative of LMF S.p.A., located in Meledo di Sarego, via Paradiso 33 (Vicenza- ITALY), declares that 
the  unit  belonging  to 

RKB

  series  complies  to  the  prescriptions  of  the  Machine  Directive  2006/42/CE,  Low  Voltage 

Directive 2006/95/CE, EMC Directive 2004/108/CE and Ecodesign Directive 2009/125/CE. 
The unit belonging to the above series is designed according to the following main safety prescriptions: 

 
- principals of safety integration; 
- used materials free from risk; 
- safety while transportation, handling and installation; 
- protection against mechanical risks; 
- protection against electrical risks; 
- protection against fire risks; 
- design and construction done so that noise emission is reduced to minimum level; 
- protection against the risk to remain trapped inside the machine; 
- CE indelible marking complete with the needed indications; 

supply of an “User manual” 

 
 
 

DECLARATION OF INCORPORATION 

(Directive 2006/42/CE 

– Annex II paragraph B) 

 
 
 
Moreover, the Legal Representative of LMF S.p.A. declares that the above machine shall be correctly installed and used 
and the system itself that integrates the machine shall be certified according to the prescriptions of the above Machine 
Directive 2006/42/CE. 

 

Finally, he declares that the physical person authorized to the management of the Technical File is Mr. Michele Mattiolo, 
c/o LMF S.p.A., via Paradiso 33, Meledo di Sarego (Vicenza - ITALY). 
 
 
Meledo di Sarego (VI) 
01/01/2013 

The Legal Representative 

 

 

 

Ferraro Mauro 

 

 

Содержание RKB 1000














Отзывы: