Gazer F122, Руководство пользователя

Страница: 13 / 60

ENG
13
Preparing MVR
One must adjust the MVR settings before using the device.
The main settings are optimal by default (factory settings)
but in any case, you must set the exact time and date. This
is necessary for correct functioning in the recording mode
and further analysis of recorded video sequences.
1. Do not connect the MVR to the power supply yet. First
make sure that all the indicators are off and insert the
memory card.
The memory card is inserted with connectors towards
the display.
2. Connect the recorder’s power unit to the car’s cigarette
lighter socket and supply the power.
When you turn on the MVR, it automatically switches to
the recording mode. That is why you will see the real time
camera image at once (loop-through channel) and the re-
cording mode indicator will light up.
3. Press the «REC/OK» button to stop the recording first,
if you want to go to the settings menu (the recording
mode will take some time to shut down as it is closing
and saving the current file) and then click the « MODE/
RETURN » button.
4. Use «UP» and «DOWN» buttons to navigate through
the menu, «REC/OK» to go to the submenu and select
the setting, and «MODE/RETURN» button to go back.
5. When you finish adjusting the settings, do not forget
to press the •REC to activate the recording mode.
6. Fix the MVR on the windshield and supply the power.
7. Use the long press «MODE/RETURN» button to
switch to the photo shooting mode and take a snap-
shot by pressing the «REC/OK» button.