FIGURE 9
1. The tent must be set up before installing the floor.
2. The tent must be spread out, so it is taut and staked down.
3. Spread the floor out loosely inside the tent.
NOTE: Align the colored tabs at the center of each side of the
floor to the colored tabs at the center of the tent panels.
4. Start at the center of each wall using the colored aligning tabs as
guides. Press the hook and loop strips together, working towards
the corners. [ SEE FIGURE 9 ]
NOTE: The tent can be taken down and stored with or without
the floor installed.
INSTALLING THE FLOOR
8. Tie the rope to each eye bolt, centered on each hub.
[ SEE FIGURE 8 ] Then loop the other end to a ground stake.
Use the slider on the tie-down rope to achieve proper tension.
FIGURE 8
FIGURE 7
7. Locate the ground stakes and tie-down ropes in the duffle bag
then fasten the stakes through each grommet. Hammer stakes
through each grommet completely. [ SEE FIGURE 7 ]
SET-UP INSTRUCTIONS CONT.
