ZZZ-205.43226MR.0705-21.GP.EN.doc WEB VERSION
12
Before You Assemble the Gazebo
Please don't destroy boxes until completely assembled.
For future reference, take pictures of all six sides of each of the boxes upon receipt.
Please verify the content of each box against the list of parts.
It is important that this gazebo be anchored on a solid base with the provided screws.
Otherwise, please ensure that you use anchors sufficient for your surface.
The gazebo should not be installed adjacent to trees or a sloped roof. Snow and ice may slide
onto the gazebo and cause it to collapse.
Tools required (not provided)
6ft (1.8m) Stepladder
Robinson #2 Screwdriver
Mallet
Tarp or protective material for placing
parts on during assembly
Tape Measure
Leveling Shim
Safety Gloves & Glasses
Step 1:
1. Assemble Beams “A” and “B” using Center Plate “F”, by sliding it inside the beams and
securely tighten
with 10 Bolts “Pp”. Repeat with Beams “C” and “D”, also using Center Plate “F”.
2
.
Lay out the assembled Beams in a rectangle and join at each corner with a Corner Plate “E”,
by sliding it inside the beams and tighten it w
ith 4 Bolts “Pp” tightly and hand fasten remaining
4 Bolts in pink.
– see image on pg. 9
Содержание 43226MR-22
Страница 13: ...ZZZ 205 43226MR 0705 21 GP EN doc WEB VERSION 13 ...
Страница 26: ...ZZZ 205 43226MR 0705 21 GP EN doc WEB VERSION 26 Step 17 Use Nut Vv to affix Top Cap K to the Central Hub L ...
Страница 28: ...ZZZ 205 43226MR 0705 21 GP EN doc WEB VERSION 28 NOTE The Dimensions Are Approximate ...