Gazebo penguin 43204MR-22, Руководство по сборке

Страница: 10 / 26

ZZZ-203.43204MR.0702-21.GP.EN.doc WEB VERSION 10
Before You Assemble the Gazebo

Please don't destroy boxes until completely assembled.

For future reference, take pictures of all six sides of each of the boxes upon receipt.

Please verify the content of each box against the list of parts.

It is important that this gazebo be anchored on a solid base with the provided screws.
Otherwise, please ensure that you use anchors sufficient for your surface.

The gazebo should not be installed adjacent to trees or a sloped roof. Snow and ice may slide
onto the gazebo and cause it to collapse.
Tools required (not provided)

6ft (1.8m) Stepladder

Robinson #2 Screwdriver

Mallet

Safety Gloves & Glasses

Tarp or protective material for placing
parts on during assembly

Tape Measure

Leveling Shim
Step 1:
1. Assemble B
eams “A” and “B” using Center Plate “F”, securing tightly with 8 Bolts “Pp”. Repeat
with B
eams “C” and “D”, also using Center Plate “F”.
2. Lay out the assembled Beams in a rectangle and join at each corner with a Corner Plate
“E”,
again securing tightly with 8 Bolts
“Pp”.