ZZZ-202.43202.0114-21.GP.EN.doc WEB VERSION
4
Before You Assemble the Gazebo
PLEASE DON'T DESTROY BOXES UNTIL COMPLETELY ASSEMBLED
Please verify the content of each box against the list of parts.
It is important that this gazebo be anchored on a solid base with the provided screws.
Otherwise, please ensure that you use anchors sufficient for your surface.
The gazebo should not be installed adjacent to trees or a sloped roof. Snow and ice may slide
onto the gazebo and cause it to collapse.
Tools required (not provided)
6ft(1.8m) Step ladder
Robinson #2 Screwdriver
Mallet
Safety Gloves & Glasses
Tarp or protective material for
placing parts on during assembly
Tape Measure
Levelling Shim
Step 1:
1. Assemble B
eams “A” and “B” using Center Plate “F”, by sliding it inside the beams and
securely tighten with 10 Bolts
“Pp”. Repeat with Beams “C” and “D”, also using Center Plate
“F”.
2.
Lay out the assembled Beams in a rectangle and join at each corner with a Corner P
late “E”,
by sliding it inside the beams and tighten it with 4 B
olts “Pp” tightly and hand fasten remaining
6 Bolts in pink.
– see image on pg. 5
