ZZZ-184.41218.1207-18.GP.EN.SUN
WEB VERSION
SUN-HI 5
Step 4:
1.
Attach roof rafters (L) to the central hub (N) using bolt (Bb). (Caution: hub may be heavy, use
support if needed)
2.
Use screws (Bb) attached to brackets to affix the roof rafter (Xx) onto the top of the middle of
the door panel.
3.
Use screw (Z) to affix the other rafters (L) onto the top of panels going through the metal piece
attached to the rafter (L).
Note: Rafters must be affixed where panels connect to each other.
Step 5:
Use the same method to assemble roof rafters (K) for the angled panels. The metal piece affixed to the
rafter (K) is adjustable, chose one hole to affix the rafter (K) to the top of the panel.
Note: 1) The K Rafter has 1 bracket with 2 holes. Attach roof with 1 screw when installing on top of the
frames. Make sure that extra hole on bracket remains on the side of angled panel (at the corner). Then
screw it to frames with screws (Z).
2) Do not tighten the bolts right away as you may have to adjust the angle when inserting the PC
roof panels.
(1)
(2)
(2)
