17
Position the ECI tower at the desired work site.
1.
- Pull the outriggers out of the back leg sockets and insert them into the front
sockets with the wheels downwards. Block them in the position required, making
sure they are fixed in place with the magnetic locking pins.* Adjust the wheels until
they touch the floor with the Allen key provided (found in the manual holder) in the
following way:
a) Unblock the spindle with the bolt found on the side of the leg.
b) Adjust the spindle until the wheel touches the floor.
c) Block the spindle again.
* The legs can be placed in the back of the tower to use it close to a wall (counterweights must be used).
2.
- Unfold the side stabiliser legs, starting with the leg with the sliding bar that is
closest to the user (see pictures below).
3.
-Make sure the ECI is properly levelled using the spirit level as a reference.
VERY
IMPORTANT:
The 8 wheels must always be in contact with the ground.
4.
-Remove the blocking hook from the aluminium profiles by turning the tube to make
the hook longer and then hook it back onto the tower, as per the following pictures.
5.
-Put the forks into the horizontal working position and lock them with the magnetic
locking pins.
A
B
Manual holder
C
Содержание ECI
Страница 2: ...2 ...
