6
7
Connecting multiple LED fixtures to a controller
Warning!
Mounting and installing of the E-series adapter(s) may only be executed by certified service personnel, in
accordance with the applicable local laws and regulations.
Warning!
The installer is responsible for correct and safe installation.
Warning!
Ensure the local cabling can support the voltage and current requirements of the LED fixture and E-series adapter.
Warning!
Avoid coiled cords and keep mains leads separated. This prevents electromagnetic interference.
Warning!
Do not connect or disconnect the LED fixture under load.
7.1
Contents E-series adapter (fig. 8)
*Not included, sold separately.
A.
Wieland RST 16i5 male connector
B.
Gavita 2xRJ connector
1. RJ IN
2. RJ OUT
7.2
Contents of the repeater bus connection kit
*Not included, sold separately.
The E-series adapter interconnect kit contains the following items:
C.
80ft interconnect cable
D.
RJ45 + 3x RJ14 terminal connectors (3x)
OPTIONAL:
•
Interconnect cable, 3 way splitter
•
Interconnect cable, crimper
•
Crimp tool
7.3
Preparation for use with a controller
Using a daisy chain setup, a maximum of 100 E-series adapters can be connected to one controller. Up to 500 E-series
adapters per daisy chain can be connected when using splitters. See section 7.4 and 7.5 of this manual and the manual of the
controller.
•
Take the unstripped interconnect cable.
•
Cut the cable to the desired length and strip both ends using a crimp tool (fig. 7).
•
Insert the cable end in the RJ connectors (fig. 8) and use a crimp tool to finish the assembly.
B1
B2
A
6.
7.
8.
