SUSIE
®
S1001 |
User Guide
56 | Wireless Network
Configure the Vital Signs Broadcast
Complete next steps to configure the transmission of the vital signs
information, after the wireless connection is established between both
computers.
1. Verify that both computers are connected to the GaumardN0000001
network using Windows® wireless connection menu. If the comput-
ers are not connected, select the network name and click “Connect”
manually.
2. Start the UNI control software on the control computer.
3. On the UNI menu bar, click the Gear> Monitors>Configuration.
4. The simulator “Virtual Mon-
itor Setup” window is dis-
played now.
5. Set the adapter to “Wire-
less network connection” or
“WIFI”.
6. Verify that the IP Type is set to automatic.
7. Write down the “IP Address” and “Port number”.
8. Click “Connect” to broadcast an outgoing connection.
9. Start the Gaumard Monitors software on the virtual monitor PC.
10. Click the “V” menu near the
top left corner, and then se-
lect “Comm Setup”.
11. Enter the IP Address from the
UNI software and verify the
port number.
