P.14
Engine assembly
All Screws on side plates should
be applied with thread locker.
M4x4
#0R4404
x2 pcs
12
M4x4
1
4
1. Install starter shaft head to starter shaft and secure it by using
two M4x4 screws.
2. Please check and test the smooth of operation of starter shaft after
complete the installment.
Please check after each flight.
If there is a shaking on, please re-install the
whole clutch and make sure all screws are tighten and glued.
Holding area
#073218
1
エンジンアッセンブリ
全てのネジ部分にネジロック剤を添付
固定エリア
1. スターターシャフトヘッドとスターターシャフトをM4 x4のスクリューを使用し締め付けます。
2. スターターシャフトのインストールが完了したらスムーズに動くか確認して下さい。
毎飛行後にこの部分を確認します。もし、グラグラしているようであれば全てのネジの締め込
みやネジロック剤の添付を行います。もしくは、もう一度取り付け作業をやり直してください。