
Setting mode
Switch on the unit by pressing the round button for 4 seconds to enter setting interface.
1
st
display is Speed limit setting, (alerts you when you go over set speed limit) press button to set up
speed (scroll left/right button to increase/decrease the value when flash press central button to save
the setting.
Press again for 2
nd
display for Km/h or MP/h settings. (Scroll left/right button to change from KM/h to
MP/h). When in Km/h display will be highlighted. When in MP/h display is not highlighted. Press
central button to save the setting.
Press again for 3
rd
display Speed deviation setting (adjusts units speed to match vehicles speedo),
press right button to enter setting (when flashes, scroll left/right button to adjust value, (adjustable
range from 0-9, in every increase or decrease value of 1, means car speed increased or decreased
by 1%).
Press again for 4
th
display Buzzer sound on/off setting, press right button to enter this setting, then
choose ON/OFF by left/right button when flashing, press central button to save the setting.
Placing Non-Slip matt and reflective film
1. Place the provided non-slip mat on vehicles dash as a base for the HUD. Its location can also be
adjusted any time. Position HUD in preferred position before applying reflector film.
2. The reflecting film should be placed on the windscreen above the HUD to reflect the HUD screen
towards the driver’s eye level when in the driver’s seat.
Procedure of pasting the reflective film
1. Lightly wet the position that the film will be placed with water
2. Rip off the protective layer of the reflective film then place the film in the preferred position.
3. Once position is ideal, you can use a scratchboard or something else flat to remove excess water
from the reflective film, until there are no bubbles or water remaining.
4. A few minutes later, the moisture inside the film will evaporate.
Technical Assistance
If you need assistance setting up or using your Gator product now or in the future, call
Gator Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
Содержание HUDGPS2
Страница 1: ...USER GUIDE HUDGPS2...