Meter Mode Settings:
The recommended setting is centre.
Anti-flicker:
This feature allows the best recording in conditions where street lights and ac lighting
is used. The Australian standard frequency is 50HZ so it should be set to
‘50hz’.
Stamp Setting:
This feature will allow you set whether to have Date, Time and/or Driver ID
stamped on all your footage produced by your DVR.
Loop Record Setting:
This feature allows you to set the size of the blocks your DVR will record
before saving and creating a new block. We recommend the DVR to
be set to ‘3’ minute blocks.
LDWS Detect:
Set whether you would like Lane Departure Warning System (LDWS) on or off.
LDWS Calibration:
Press the arrow buttons to adjust the purple line. To adjust the red line, press
the Mode Button.
Adjust the red line to edge of the bonnet and the purple line to set the distance to
the car in front of you.
G Sensor:
This feature allows you to set the sensitivity of the Gravity sensor in the DVR. We
recommend this be set to ‘Medium’ to help stop false or irrelevant readings.
Motion Detect
: This feature is for activating you DVRs motion detect feature when you want your
DVR to record if it detects movement such as people who are walking past you vehicle or set on
when you have your car in an unprotected area.
NOTE: When this feature is activated, your DVR will not loop record and your card will fill up until
your DVR says ‘CARD FULL’.
Mic:
This Feature will allow you to turn the DVRs recording sound on or off. If you want to stop the
DVR re
cording sound in the cab of your vehicle, set this feature to ‘off’.
Press the menu button again until you see the following Spanner and screwdriver.
(SETUP MENU)
Language Setting:
Allows you to choose from a selection of languages that include: English,
Simplified Chinese, Traditional Chinese, Russian, Polish, Dutch, Czech and German.
Card Volume:
This simply states the total size of your SD card, how much it has used and how
much is left.
System Mode:
We recommend this be set to
‘PAL’ as PAL is the Australian standard line frequency
and will work on any TV when playing back your footage on TV via provided HDMI cable.
Driver ID Setting:
This feature allows you to put the name of the vehicle user or number plate in
the DVR. You can adjust this by using the arrow buttons to select the position and then press the OK
button to allow you to select the character. You can change the character by using the arrow
buttons. Press the OK button again to go back to changing the position. Press the Menu button to
finish.
Time Setup:
This feature will allow you to change the year, month, day and time. To change the
date simply press the OK button on the selected date and then use the arrow keys to go up or down.
Press the OK button again save that setting and allow you to move onto the next date.
Содержание HDDVR400L
Страница 1: ...USER GUIDE HDDVR400L...
