Operation Instruction
Built-in 3.7V/300mAh high power capacity battery.
Connect to 12V/24V car charger to driving recorder:
When used as driving recorder, connect the device with the car charger. Thus, it will start to
record automatically when vehicle ignition is on, it will stop recording and save the
recording when ignition turns off.
The memory card:
1. Confirm the inserting direction of Micro SD card, wrong direction could damage the DVR
and Micro SD card
2. Use the SDHC specification conforming high speed Micro SD card.
3. Format the Micro SD card on the device on first use.
Turn on/off and auto off of video recorder:
1. Press the power key for 1 second to turn on/off the device.
2. For longer battery life, set the automatic off time in the menu, the device will turn off
automatically when not in operation .
To enter the menu: long press MODE key to enter the menu setting selection.
Video recording: short press REC/OK key to start/stop recording.
IR Light Display: short press “ON/OFF key” to shift the fill light mode.
Motion Detection: press DOWN key to turn on/off while on standby.
Turn off the screen: long press OK key to turn off the screen to save electricity, press any key
to turn it back on.
Photo mode: press shutter key to take a photograph while on standby.
Camcorder Mode
1. Press REC button to start the video recording, and then press REC button to stop the video
recording. During the process, red icon will be on the screen.
2. Select Flashlight: Choose the mode of flashlight in the status of video recording by pressing
ON/OFF key. The sequencing will be flash, automatic flash and no flash.
3. Digital zoom: Focus the camera on the subject; press the key Up and Down to make the digital
zoom.
Resolution: select the video resolution: 1920x1080P/30fps, 1440x1080P/30fps, 1280x720P/30fps
Audio: ON and OFF Mic
Loop recording: Set ON/OFF Loop recording, it will cover the last files when the memory of
Micro SD card is full on Loop recording mode.
Power off delay: Select whether you want to delay switch off when the ignition switches off
IR Light: Select Flashlight ON/OFF/Auto
Motion Detection: ON/OFF
Motion Detection Sensitivity: Set sensitivity of motion detection, from 1 to 8
Language: Set Language
