P1
P2
Monitor Features
•
•
•
•
•
•
•
•
•
•
•
•
•
7” High Resolution Monitor
Resolution 1024x600 RGB
Bright 450CD Display
Aspect Ratio: 16:9
4X Video Inputs
Single/Split/Quad Display Selectable
PAL/NTSC Auto Switching
Rear View Delay (0~15S selection)
High/Low Voltage & Short Circuit Protection
12/24 Input Voltage
Detachable Sunshade
Supplies 12V Power to Cameras
Records 4 Video Streams on to 1 File
Requires Class-10 or Higher SD Card
Supports up to 64GB SD Card (*Sold Separately)
1 x Hi-Resolution Monitor
1 x 2
Metre
Wire harness
1x 10 Metre Prolink II extension cable
1 x Sun shade
1 x U-bracket
4 x U-bracket screws
1 x Remote controller
1 x SD Slot Cover
Product structure
Inclusions
Monitor functionality & settings
DVR functions
Mode Button (Mode1 on remote)
Press and hold (long press) mode button (or DVR/AV on remote) to switch to individual
full screen camera views (each camera is always on unless another camera is triggered.
Short press mode button to switch between cameras) Please note: DVR function does
not work when in this mode. Press and hold (long press) mode button (or DVR/AV on
remote) to switch to multi view/DVR mode. Short press mode button to cycle through 12
different views 4 x single camera views 1, 2, 3, 4 2 x dual camera views 12, 34
4 x triple camera views 123, 124, 134, 234 2 x quad camera views 3142, 1234
Clock Setup
Press Setup on remote to access the Date/Time settings. Use up, down and Rec/> to
change settings.
Enter Button
Press enter button (Mode 2 on remote) to enter DVR playback. Press left and right
buttons to scroll through files, press record (rec/> on remote) to play/pause files. Press
Setup on remote to Delete files, Protect files or to format SD card.
1. Power ON/Off
2. Camera input viewing modes
3. Left
4. Menu
5. Right
6. Enter (DVR playback)
7. Record
8. Remote sensor
SD Slot (Back)
