Acc-Time:
This sets the Switch off time after the Trigger is removed. For example, when
the car is in reverse the Back up wire of the car triggers the camera to turn on
automatically, when the trigger is lost (the car is taken out of reverse) the Image is
switched off. The Acc-Time allows the camera to stay on a prescribed amount of seconds
after the trigger is lost.
Sleep:
Set a time that the monitor automatically shut off if there is no signal.
Flips:
Depending on the direction of the camera and the orientation of the camera head,
You may wish to change the orientation of the image for each camera. An example of this
function would be in the event you have a forward facing camera and a rear facing
camera. One of these images is best viewed as a mirror image (the rear view) and the
other as a normal view (the front facing camera) another situation that may need to be
addressed is a camera that is hung upside down.
NOTE: the adjustment of this menu item effects only the currently viewed camera. In
order to adjust this aspect for a specific camera you will need to use the mode button to
select the video image you want to change before entering the menu system.
Alternatively this function can be accessed directly from the flip button at the bottom Right
hand side of the monitor.
4. Function:
Guidelines:
Turn On/Off for each camera in use. Guidelines do not appear when
accessing the Mode button settings. The guide lines will only appear when the camera is
triggered.
Menu structure
Press the Menu button to scroll through the main menu structure.
Each press of the menu button will advance the user though the 4 menus as listed below.
1. Image:
Brightness/Contrast/Saturation/Reset
2. Voice:
Volume ( Not used on this model)
3. System:
Language/Acc-Time/Sleep/Flips
4. Function:
Guide lines/Auto Dim (Not used on this model)
To make a change to one of the parameters set under one of these menus press the right
or left button. If you press the left button you will begin at the last menu item. If you press
the right button you will begin at the top of the menu. To advance to the parameter you
wish to change press the Mode Button. This will cycle you down through the menu. When
you arrive at the parameter you wish to change, press the left or right button to change
the value. To finish wait for 5 seconds without pressing anything and the system will
revert to its previous situation, or you can press the Menu button and then the Mode
button.
1. Image:
Brightness:
Adjusts the brightness of the screen. Be careful not to adjust this setting to
high as this will reduce the contrast (blacks will eventually become greys reducing the
contrast to whites).
Contrast:
Adjust the transitions of highlighted areas to darkest shadows. A higher
contrast makes the image appear sharper, but to much contrast will remove subtle details
in the mid tones.
NOTE: There is also a direct access button second from the right (Picture) at the base of
the screen thats adjusts the brightness and contrast to preset levels. This button toggles
between settings of Day, Night1, Night2, Night3, and User settings. When you use these
settings the user settings are lost.
Saturation:
This adjusts the colour saturation. Higher levels yield more colour, However,
to much colour may effect night time performance (may result in a noisy image).
Reset:
Returns the unit to factory settings.
2. Voice:
Volume:
(Not used on this model adjusting this level has no effect).
3. System:
Language:
There are 13 different language settings including popular languages such as
German, Chinese, Italian, Arabic and Spanish.
P3
P4
