Gator GRV43SKT, Руководство пользователя

Страница: 9 / 16

9
Adjusting the camera angle
1. When you want to adjust the camera angle, firstly make sure
the monitor is powered, by pressing the "Touch For Rearview"
button to enter working status.
2. Please note when rotating the camera, hold the license base
plate with one hand, hold the camera outer frame with the other
hand, then move up or down to adjust the angle.
Operating your device
1. Switch your 12-volt DC power port on with your ignition, the
monitor will start work accordingly, the video signal will be sent
from camera and will be displayed on the monitor.
The image is set to time out after 45 seconds (default). However
if you wish to shut the image off manually, just touch the 'Touch
for Rearview" Button on the monitor again anytime to stop at
once.
2. If you want to see the rearview image when driving your car ,
just touch the 'Touch For Rearview" Button on the top of
monitor.
3. When the vehicle is shut off, power is removed from the
monitor and the monitor will shut off automatically, and the
camera will stop working.
4. When the camera is active the light to the right on the camera
will illuminate