Gator GALT02 Скачать руководство пользователя страница 7

Settings

Volume:

To change the default volume of the device, press the 

Volume Button(13) whilst the device is on. Each press will 

cycle up through the values (0-9/ 0 is Mute)

Time Zone:

To change the default time zone of the device, press and 

hold the Reset button(17) whilst the device is off (vehicle 

ignition is switched off). Then switch on the vehicle ignition, 

the current time zone setting will be displayed on the 

Temperature/Voltage display (8)(9).

Note: The default time zone is set to GMT.

Press the Power Button(17) to cycle to the desired value and 

then turn off the device. When the device is next powered on, 

the time zone will be set to the chosen value.

Measurement:

To measurement readings (speed, altitude,temperature) of 

the device can be adjusted from metric to imperial.

Note: The device is set to Metric by default.

To change the measurement type, Press and hold the Volume 

Button(13) whilst the device is off (vehicle ignition are 

switched off). Then switch on the vehicle ignition. The 'km/h 

'M' 'C' (Metric) or 'mph', 'Ft, 'F' (Imperial) will be 

6

Speed

Altitude

Temperature

Metric

Km/h

m

°C

Imperial

Mph

ft

°F

Содержание GALT02










Отзывы: