![GATEWORKS GW2342 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/gateworks/gw2342/gw2342_operating-manual_570074017.webp)
Avila Network Computer Operating Manual
17 of 25
Power Connector (J9)
Power is applied to the GW2342 through a standard 2.5mm x 5.5mm barrel jack
or through either Ethernet Connector. The input voltage range is 6VDC minimum
and 28VDC maximum. The power jack should have the positive input voltage on
the inner sleeve and ground on the outer sleeve. The mating connector is a G/S
SR2048A, available from Jameco as part number 190537CJ. The schematic
symbol representing this configuration is shown below.
Power Connector
Ethernet Connectors (J10, J11)
The GW2342 contains two 10/100 Base-TX Ethernet channels. Both Ethernet
channels are available through standard 8-pin RJ45 connectors. Both Ethernet
connectors support passive power over Ethernet. This enables the GW2342
operating voltage to be provided through the Ethernet connector rather than the
Power connector. The input voltage range is 6VDC minimum and 28VDC
maximum.
Pin
Signal
Standard Wire
Color
1
TX+
WHITE/ORANGE
2
TX-
ORANGE
3
RX+
WHITE/GREEN
4
PoE + V
BLUE
5
PoE +V
WHITE/BLUE
6
RX-
GREEN
7
GND
WHITE/BROWN
8
GND
BROWN
Ethernet Connector J10
Pin
Signal
Standard Wire
Color
1
TX+
WHITE/ORANGE
2
TX-
ORANGE
3
RX+
WHITE/GREEN
4
PoE + V
BLUE
5
PoE +V
WHITE/BLUE
6
RX-
GREEN
7
GND
WHITE/BROWN
8
GND
BROWN
Ethernet Connector J11