Gateway MX6708, Справочник по аппаратуре

Страница: 53 / 72

Replacing the keyboard www.gateway.com
49
4
Insert the tabs on the front edge of the keyboard into the slots under the
palm rest. You may need to press down on the keyboard keys along the
front edge of the keyboard to seat the retaining tabs into their
corresponding slots.
5
Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place. Be careful not to damage the
LCD panel.
Caution
If the cover is not correctly replaced, your
notebook could be damaged when you
try to close the LCD panel.
6
Place the cover on the notebook, then press down on the cover in several
places until it clicks in place. The cover is correctly mounted when you can
run you finger along the cover and find no loose spots. The cover should
be flat all the way across.
7
Close the LCD panel, then turn the notebook over so the bottom is facing
up.
8
If you removed screws in Step 18 , replace them.
9
If you removed the mini-PCI bay cover in Step 17 , replace it, then tighten
the screw.
10
If you removed the memory bay cover in Step 16 , replace it, then tighten
the screws.
Tips & Tricks
The screw hole is marked with a K.
11
Replace the keyboard screw you removed in Step 7 .
12
Insert the battery(ies), then turn your notebook over.
13
Connect the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network cable.