background image

2

www.gateway.com

Replacing the Memory Module

Technical Support

See the label on the bottom of the notebook for Customer 
Care Information. See your hardware guide for important 
safety, regulatory, and legal information.

© 2006 Gateway, Inc. All rights reserved. Gateway and 
eMachines are trademarks or registered trademarks of 
Gateway, Inc. in the United States and other countries. 
All other brands and product names are trademarks or 
registered trademarks of their respective companies.

9

Pull the memory module out of the slot.

10

Hold the new or replacement module at a 30-degree 
angle and insert it into the empty memory slot. This 
module is keyed so it can only be inserted in one 
direction. If the module does not fit, make sure that 
the notch in the module lines up with the tab in the 
memory bay.

11

Press the module down until it clicks into place.

12

Replace the memory bay cover, then tighten the 
cover screw.

13

Insert the battery, then turn your notebook over.

14

Connect the power adapter, the modem cable, and 
the network cable.

15

Reconnect all peripheral devices and replace any 
Express cards.

16

Turn on your notebook.

Содержание MX3311












Отзывы: