Gateway MT-6733, Руководство по замене аппаратных средств

Страница: 8 / 12

Replacing the Keyboard
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your reference guide for important safety, regulatory, and legal information.
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
12 Insert the small flat-blade screwdriver under the bottom of each
hinge cover and gently pry them up.
13 Carefully open the LCD panel to the fully opened position.
14 Insert the small flat-blade screwdriver under the right hinge cover
and gently pry it up. The hinge cover is part of the keyboard
cover.
15 Pull the keyboard cover off the notebook. Be careful to not
damage the LCD panel.
16 Lift the back edge of the keyboard slightly, then slowly slide it
toward the LCD panel to release the keyboard retaining tabs
located on the front of the keyboard.
17 Slowly rotate the keyboard toward you so it lies keys-down on
top of your notebook. Be careful to not damage the LCD panel.
18 Slide the black keyboard connector clip to the front of the
notebook and slide the cable out of the clip. Be careful not to
touch or damage any other components.
Installing the new keyboard
To install the new keyboard:
1 Place the new keyboard keys-down on your notebook with the
space bar away from you.
2 Make sure the black keyboard connector clip is fully moved
toward the front of the notebook, insert the cable into the
connector, then slide the black clip to lock the connector in place.
3 Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
4 Insert the tabs on the front edge of the keyboard into the slots
under the palm rest. You may need to press down on the
keyboard keys along the front edge of the keyboard to seat the
retaining tabs into their corresponding slots.
5 Gently press the keyboard down until it is flat all the way across.
The keyboard should easily fall into place. Be careful to not
damage the LCD panel.
6 Replace the keyboard cover. Press down on the cover in several
places until it clicks in place. The cover is correctly mounted when
you can run you finger along the cover and find no loose spots.
The cover should be flat all the way across.
7 Close the LCD panel, then replace the two hinge cover screws.
8 Turn your notebook over so the bottom is facing up.
9 Replace the optional keyboard screw.
10 Replace the memory bay cover.
11 Replace the keyboard screw.
12 Insert the battery, then turn your notebook over.
13 Connect the power adapter, the modem cable, and the network
cable, then turn on your notebook.
14 Reconnect all peripheral devices and replace any Express, PC, and
memory cards.
Connector
Important
The keyboard cable is correctly oriented if it is not twisted.
Caution
If the cover is not correctly replaced, your notebook could be
damaged when you try to close the LCD panel.
2