Gateway Media Center, Настройка, Страница: 9 / 16

9
5
Plug the IR emitter into the
port on the back of the remote
sensor.
8
Connect the coaxial cable from an antenna,
a direct cable connection, or a set-top box
coax-out port to the coax-in port on the back
of your computer.
Remove the adhesive paper
from the back of the IR emitter.
6 7
Place the sticky side of the
IR emitter on the set-top box
sensor window. Make sure that
the infrared emitter is placed
directly in front of the IR sensor.
Devices that are connected to your computer and that are not
grounded correctly could cause damage to your computer. Make sure
that the video source to your computer is electrically grounded. For
more information about correct grounding, see your Gateway computer
user’s guide.