Gateway E1400 Скачать руководство пользователя страница 102

Страница: 102 / 136

Modem problems

Modem problems

The modem is not recognized by the system.

Probable Cause

Solution

The modem has not been
added as new hardware.

Add the modem as new hardware.

The modem is not connected
to a live phone jack.

Make sure the line connected to the modem
is live and plugged into the appropriate port on
the modem (line port).

The modem is not configured
with a valid interrupt or
address.

Check the system settings for possible
conflicts. If one exists, correct the problem by
selecting an available interrupt and address.

The phone jack is shared by
another modem or telephone.

If the modem shares the jack with another
device, make sure the other device does not
have the port open (for instance, someone is
on the phone, or another modem is in use).

05960.book Page 95 Monday, February 21, 2000 2:47 PM

Содержание E1400









































































































































Результаты поиска

Содержание E1400

Отзывы:

Похожие инструкции для E1400

Бренды по названию

Популярные бренды

Gateway E1400, Системное руководство

Результаты поиска

Содержание E1400

Отзывы:

Похожие инструкции для E1400

Бренды по названию

Популярные бренды