Gateway E-9425R, Руководство пользователя

Страница: 85 / 128

Troubleshooting www.gateway.com
79
LED information
See the following table for a description of this server’s LEDs and the information
they provide:
9 The ROM checksum value does not match
the value encoded in the BIOS. Same as for 4 beeps.
10 The shutdown register for CMOS RAM
failed. Same as for 4 beeps.
11 The cache memory test failed. Same as for 4 beeps.
Beeps Description Troubleshooting steps
LED Name Function Location Color Description
ID Aid in server
identification Control panel
and back of
system board Yellow
(front)
Blue (back) On - Server identification
enabled
System Fault Visible fault
warning Control panel Red Off - System normal
Blinking - Non-critical
system fault
On - Critical system fault
(system needs to be shut
down and serviced)
Hard drive
tray LEDs Indicate drive
status and
activity On each hard
drive tray Blue or red Blue (On) - Hard drive
present
Blue (Blinking) - Hard drive
activity
Red (On) - Hard drive fault
Red (Blinking) - Hard drive
rebuilding
Off - No hard drive access