Gateway E-3600 Скачать руководство пользователя страница 125

Страница: 125 / 158

Printer problems

117

Printer problems

The printer will not turn on.

The printer is turned on but will not print.

The printer prints garbled text.

Probable cause

Solution

The printer is not plugged in

Make sure the power cable is plugged into a
working power source.

The printer is not turned on

Make sure the printer’s power switch is
pressed or set to the On position. If the printer
is turned on, the green power LED should be
illuminated.

The printer is defective

Try another printer, if one is available.

Probable cause

Solution

The printer is not connected
to the computer

Make sure the data cable is properly
connected between the printer and the
computer. Check the connector and cable for
bent or broken pins.

The printer is not designated
as the default printer

If the printer that you are trying to print to is
not the default printer, make sure you have
selected it through the program’s printer setup
function.

The printer has not been
added to the computer.

In the Printers window, double-click

Add

Printer

. Follow the on-screen instructions for

adding the new printer.

The printer is not on-line
(ready)

Make sure the on-line or ready light is on, or
the display indicates “Ready.”

Probable cause

Solution

The wrong driver is being
used for the selected printer

In the Printers window, click to select the
printer, click

File

, then select

Properties

Make sure the printer is using the correct
printer driver. If not, install the correct one.

Содержание E-3600































































































































































Результаты поиска

Содержание E-3600

Отзывы:

Похожие инструкции для E-3600

Бренды по названию

Популярные бренды

Gateway E-3600, Системное руководство

Результаты поиска

Содержание E-3600

Отзывы:

Похожие инструкции для E-3600

Бренды по названию

Популярные бренды