background image

Technical Support

See the label on the bottom of the notebook for Customer Care Information. See 
your 

Reference Guide

 for important safety, regulatory, and legal information.

© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks 
or registered trademarks of Gateway, Inc. in the United States and other countries. 
All other brands and product names are trademarks or registered trademarks of 
their respective companies.

Replacing the Main Battery

Replacing the Main Battery

Locating Components

  To replace the main battery:

1

Disconnect your convertible notebook from the optional port 
replicator.

2

If your convertible notebook is on and is connected to AC power 
or has a charged multibay battery installed, go to 

Step 4

.

-OR-

If your convertible notebook is on, is not plugged into an AC 
outlet, and does not have a charged multibay battery installed, 
save your work and turn off your convertible notebook.

3

Turn the LCD panel to notebook mode, then close the LCD panel.

4

Turn your convertible notebook over so the bottom is facing up.

5

Slide the battery lock to the unlocked position, then slide the 
battery latch.

6

Slide the main battery out of your convertible notebook.

7

Slide a recharged battery into your convertible notebook until it 
snaps into place.

8

Slide the battery lock to the locked position.

9

Turn your convertible notebook over.

10

Connect to the optional port replicator.

11

Open the LCD panel.

Important

If your convertible notebook is connected to AC power or if you have 

a charged multibay battery, you can replace the main battery while your 
convertible notebook is turned on.

Warning

Danger of explosion if the battery is incorrectly replaced.

Replace only with a battery specifically manufactured for your convertible 
notebook. Recycle or dispose of the battery as hazardous waste.

The battery used in this device may present a fire or chemical burn hazard 
if mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.

Keep away from children.

Main battery

Battery lock

Battery latch

1

Содержание C-140S











Отзывы: