Gateway ADAC Ultra2 S466, Руководство по оборудованию

Страница: 74 / 112

ADAC Ultra2 S466 Hardware Guide 60
Step 5 Set Jumpers,
Continued
J8, J9 J8 and J9 are 3-pin jumpers. The factory setting is Pins 1-2
shorted. Pins 1-2 should always be shorted for J8 and J9.
J10 J10 is a 3-pin jumper. Make sure Pins 1-2 of J10 are
always shorted. This is the factory setting.
J11, J12 i960RP Initialization J11 and J12 are 2-pin bergs that specify the
i960RP mode when initially powered up. Mode 3 is used
for normal operation (J11 and J12 OPEN). All other modes
are used for test purposes only.
I960RP Initialization Mode J19 Setting J22 Setting
0 Short Pins 1-2 Short Pins 1-2
1 Short Pins 1-2 OPEN
2 OPEN Short Pins 1-2
3 OPEN OPEN