Gateway 960, Руководство по установке

Страница: 17 / 36

13
Converting your server to a rackmount server
www.gateway.com
To install the rackmount handles:
1
Align one of the rackmount handles with the four screw holes on the side
of the case toward the front. Attach the handle with four Phillips hex head
screws from the accessory kit.
2
Attach the second handle to the opposite side of the server.
Installing the front cover and top panel
To install the front cover and top panel:
1
After converting to the rackmount server configuration, reinstall the top
panel.
2
Reinstall the front cover.
3
Go to “Installing your server into a rackmount cabinet” on page 14.
Screws