Gateway 960, Руководство по установке

Страница: 8 / 36

4
Installing Your Gateway Server into a Rackmount Cabinet
www.gateway.com
Converting your server to a
rackmount server
You can convert your Gateway 960 or Gateway 980 server to a rackmount
server. Before converting your server, make sure that the server is on a stable
work surface, such as a strong table or counter.
Although your server configuration may vary from the server configuration
shown in the following instructions, the general installation process will be
similar. To convert your server to a rackmount server, you need to complete
the following tasks in sequence:
1
Remove the front cover, side and top panels, and feet.
2
Remove and rotate the drives, drive bay adapters, and EMI shield 90
degrees.
3
Rotate and install the front cover drive faceplates.
4
Install the rackmount handles.
5
Install the front cover and top panel.
If your server came from Gateway pre-configured for rack installation, go to
“Installing your server into a rackmount cabinet” on page 14.
Warning To avoid injury or damage to the server, we recommend
that two people lift the server.