Gateway 955, Руководство пользователя

Страница: 48 / 144

42
Chapter 3: Maintaining Your Server
www.gateway.com
5
In the
SNMP Community String
box, you can type an optional string for the
community field in the
Header
section of the SNMP trap sent for an alert.
The string must be from 5 to 16 characters. The default string is public.
6
In the
IP Setup
box, click either:
■
DHCP
—The IP address for the server is automatically assigned by the
DHCP (dynamic host control protocol) server on the network. The
Host, Gateway, and Subnet Mask boxes in the dialog box are ignored.
■ Static
—Assign the IP address for the server using the Host, Gateway,
and Subnet Mask boxes in the dialog box.
7
If you chose
Static
IP Setup in the previous step, complete the IP addressing
boxes:
■ Host IP Address
—The IP address of this server.
■ Gateway IP Address
—The IP address of the router for this server.
■ Subnet Mask
—The IP address for the server’s subnet. The server uses
this to decide if the alert destination is on the same subnet.
8
In the
Alert IP Address
box, complete the IP address of the system you want
to receive alerts from this server. If you want the alert to be broadcast to
an entire subnet, enter the IP address for the subnet.
9
Click
Options
, then click
Configure Event Actions
.
10
In the BMC LAN Alerting Actions window, move the events that you want
to generate an alert to the
Enabled
column and move all other events to
the
Disabled
column using the following buttons:
■
>> Moves all events from the Enabled list to the Disabled list.
■
> Moves the selected event from the Enabled list to the Disabled list.
■
< Moves the selected event from the Disabled list to Enabled the list.
■
<< Moves all events from the Disabled list to the Enabled list.
11
Click
Save
to save the changes.
12
Click
Close
to return to the BMC LAN Configuration window.
13
Click
Save
to save the changes.
14
Click
Close
to return to the PEM window.