Gateway 450RGH, Руководство по обслуживанию

Страница: 54 / 83

49
Replacing the hinge covers
www.gateway.com
Replacing the hinge covers
Tools you need to complete this task:
Screws removed during this task:
To replace the hinge covers:
1
Disconnect the AC adapter, modem and network cables, then prepare the notebook
by following the instructions in
“Preparing the notebook” on page 7 .
2
Turn the notebook over so the bottom is facing up.
3
Remove the main battery by following the instructions in “Removing the main
battery” on page 8 .
4
If the modular bay contains the secondary battery, remove the secondary battery
by following the instructions in
“Replacing the modular bay component” on
page 10.
5
Turn the notebook over so the top is facing up.
6
Remove the keyboard cover by following the instructions in “Replacing the keyboard
cover” on page 25 .
7
If you are replacing the left hinge cover, go to Step 8 .
-OR-
If you are replacing only the right hinge cover, go to Step 10 .
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard) 4 chrome 2.5 × 4 mm
(cooling assembly)