Gates UNIPRESS 4, Руководство по эксплуатации

Страница: 15 / 54

15
GATES.COM
UNIPRESS 4 (UP4)
OPERATION MANUAL
1.2.11 DECLARATION OF INCORPORATION
DECLARATION OF INCORPORATION (ORIGINAL)
EC Guideline Machines 2006/42/EC, Appendix II, 1, A
This is to certify that the incomplete machine
Product name: Cutting ring assembly and flaring machine
Type designation: UNIPRESS 4
Machine number:
Year of construction:
2016
conforms, in its serial version, to the following relevant regulations:
Guideline 2006/42/EC in the version from 17.05.2006
Guideline 2014/30/EC in the version from 26.02.2014
The low voltage directive 2014/35/EC in the version from 26.02.2014 was maintained in reference to its
objective
(s. Appendix I, No. 1.5.1 of the guideline 2006/42/EC).
Selection of applied harmonised standards, their source having been published in the Official Journal of the
European Communities:
EN ISO 12100:2010
EN ISO 14120:2015
EN 349:1993 + A1:2008 EN ISO 13849-1:2015
EN ISO 4413:2010 EN ISO 13849-2:2012
EN ISO 13857:2008
The special technical documents according to directive 2006/42/EC, Annex VII, B have been prepared.
Commissioning of the partly completed machinery in prohibited until the partly completed machinery
complied with the provisions of the EC Machine Directive and the EC Declaration of conformity according to
annex II A is available.
For this purpose, the operating instructions in accordance with the above Machine Directive must be enclose.
Manufacturer:
PIPE BENDING-SYSTEMS GmbH & CO. KG , Hunold-Rump-Str.76-80, 57368 Lennestadt
Authorised person for the compilation of the technical documents: Dipl.-Ing. Manfred Schauerte
Note: The conformity declaration loses its validity if the customer alters any details of the unit without having
contacted the manufacturer first.
Lennestadt, den ………………… 2016
Meinolf Rameil, Technischer Geschäftsführer