Setup
Page 13
Continue housing setup.
From this point the remaining setup of Pro Action is
found in the Pro Action Setup, Use and Care Guide.
Post Dive Procedures.
Blow off excess water.
Using compressed air and / or a dry cloth, clean water
away from the mate between Nikonos RS lens and Bulkhead Cover.
Release vacuum.
Before removing a Nikonos RS lens,
the vacuum must be fully
released.
CAUTION: FAILURE TO FULLY RELEASE HOUSING VACUUM MAY RESULT IN
WATER BEING DRAWN INTO THE EPIC CAMERA SENSOR AREA.
Release the lens.
As noted on page 15, the lens can be removed by aligning the
Release Control knob to the position pointing directly at the lens, and then press.
While holding, rotate the lens clockwise ~30 degrees until it comes free of the
housing.
Dissasembly.
Follow the procedures in this manual in reverse to break down the
Nikonos RS kit.
