Gates MK2000, Руководство пользователя

Страница: 3 / 10

1 INTRODUCTION
1.1. GENERAL INFORMATION
You have just acquired a GATES MK2000 bench model hose cutting machine
and we congratulate you on your choice.
This sturdy machine will give you long and satisfactory service. To this effect, it
is important to adhere to the enclosed instructions.
The MK2000 is designed to cut all types of hoses from one-wire ¼” to 1” 4-spiral
wire.
All the information concerning the operation, use and maintenance of the
MK2000 can be found in this booklet.
1.2. WORKING PRINCIPLE
CUTTING
This cutter is designed to achieve a clean cut at right angles to the hose if
spreading pins are correctly set. The method employed consists of bending the
hose as it comes into contact with the circular blade, thus reducing friction and
ensuring a clean cut.
ELECTRICAL
SYSTEM
The electrical system is comprised of an electric motor and its controls.
A “run-stop” switch supplies power to the motor which is 220/380 V – 3 phase.
3