10
11
EZ ALIGN
™
RED
PRECISION LASER ALIGNMENT OPERATING INSTRUCTIONS
ALIGNMENT
CONDITION CHECK
Vertical Angularity
Axial Offset
Horizontal Angularity
MISALIGNMENT CONDITIONS AS
DISPLAYED ON THE GATES EZ ALIGN
™
Vertical Angularity
Axial Offset
Horizontal Angularity
Offset
marks
Alignment Reference Lines
For different pulley edge thicknesses, use the
offset marks on the face of the reflector to establish
the amount of offset. The marks are in 1/8-inch
increments.
Alignment processes should be carried out in
an area protected from bright sunlight, or in
a shaded area, to allow easy viewing of the
laser line on the Gates EZ Align
™
units.
Misalignment conditions include vertical angularity,
horizontal angularity and axial offset. The position
of the transmitted laser line on the
reflector
indicates vertical angularity and axial offset.
Horizontal angularity is indicated by the position of
the reflected laser line on the
transmitter
.
TYPICAL MACHINE
MISALIGNMENT CONDITIONS
