The CX700 / CX560 Setup
Page 12
Water Alarm (Optional)
If you have the optional water alarm installed there are three alarm conditions to know:
Condition LED
Siren
New Battery
(Insertion)
Bright Intense blink
while siren plays
Ascending tones played 4 times
Water Intrusion
Bright Intense Blink
Grating Warble sound. Alarm will
sound for duration of detection.
Low Battery
Low Intensity fast blink
Descending tones played 8 times
pausing approx. 20 seconds between
plays after alarm test or water
detection.
The alarm can tested anytime by shorting the detection contacts that lead to the water
alarm transducer. The water detection condition will activate for 6 seconds. If the battery
is drained the low battery condition will sound.
The water alarm requires a single 6V battery
like Radio Shack model 23-469 or A544.
Your battery should be removed when stored
(e.g. between dive trips). Check the battery
prior to every dive to ensure proper operation.
Change when indicated.
CAUTION
: You must wait a minimum of
30 seconds between battery insertions to
allow the unit to fully discharge.
Typical Water Alarm installation.
