The CX760 / PJ760 Setup
Page 7
3:
The CX760 / PJ760 Setup
The CX760 / PJ760 housing requires complete and thorough setup prior to use.
CX760 / PJ760 Housing Preparation
Open the CX760 / PJ760 shell.
Two stainless steel safety latches secure the
housing halves. They have a positive locking feature, so to open them you must
first depress the center bar release while lifting the rear lever.
Separate
the rear half of housing from the front.
Remove the camera mount.
Rotate the lock counterclockwise and slide the mount
to the rear.
Retract and Rotate controls.
Pull out the Manual Dial, Manual Button Select Dial
and Zoom ~ 1 inch or until they stop. Rotate the Power Control clockwise.
Rotate the lock to this position and
slide the camera mount out of the
housing.
Release the latches and separate
the housing shell halves.
Note HF-S21 housing shown.
