GATEQ ENAV-6520i, Руководство пользователя

Страница: 7 / 19

Speaker Wire/Power Wire definition of interfaces:
Remark:
1. system will be on parking ON status when Parking line is used. Keys
are unavailable in safety drive mode(parking ON).
2. Please connect it to GND when you don't use 'Parking' line.
Chapter IV. Direction of Basic Functions
4.1 Turn on /off machine
4.1.1 Turn on machine
4.1.2. Turn off machine
4.2 Disc in/out
.
The product applies automatic flexible LCD. The screen will return to
preset when turning on/off:
1) Press power key （ on panel or on remote ） for a while can
Open The machine. The system will be on the default status of the
last turn-off. The screen will return to the last position. The machine
enters into Fm1 wave band interface if it is the first time to work.
If you turn off the machine by pulling key out last time, it is
unnecessary to press Power key, the system will turn on
automatically, and the machine returns to radio picture.
1) Press power key for a while when the system is on, and the system
will be off, the screen return to the parallel position of panel.
2) The system will turn off automatically if the vehicle is off, and the screen
panel will be back to the parallel position of panel.
1) Press on panel or on remote when the system is on, the panel wil
get out, and disc eject automatically, you also can insert/pull out SD
card.
2) Press on panel or on remote after placing disc, the screen will
return to the former status.
Notice:
1) You should ensure that there are not obstacles in at least 15cm of the
direction of the screen putting out, so as to prevent obstacles
damaging the machine when the screen panel is putting out.
2) The machine boasts block disc prevention function, the electrical
machine will stop automatically if there is disc in the opening or disc is
getting out.