SV12 v3
6 of 55
1
Introduction
1.1
Welcome to Your New SV12 v3
Congratulations on the purchase of your new Gatekeeper Systems SV12 v3.
The 360° Surround Vision Camera System provides real-time and broad surround view of the vehicle for
blind-spot detection. With 4 channels 1080P wide-angle cameras and video processor, a high resolution
panoramic real-time stitching scene is available on the display monitor. The display monitor is off when
the vehicle is moving forward. As the vehicle is reversing or making side turns, the display monitor turns
on and provides a split-screen display of a 360° stitching image and a rear, left, or right view. The 360°
Surround Vision Camera System is easy to install and calibration is customizable to meet specific vehicle
requirements. The display monitor shows the parking assist line when parking the vehicle.
It supports external Wi-Fi antennae, two 128GB SD cards for storage and it is NDAA compliant. To
playback the recorded video or search for any sensor alarm triggers, the SV12 v3
utilizes Gatekeeper’s
custom video viewing software, “G4 Viewer Plus”. G4 Viewer Plus is an easy
-to-use application that
allows users to quickly find the video of interest and save as a clip in MP4 format. G4 Viewer Plus is
available as a free download from
Gatekeeper System website (www.gatekeeper-systems.com).
1.2
Important Safety and Handling Information
Before using the product, please ensure that you observe the safety precautions described below.
Always ensure that the product is used correctly and by the listed instructions. Be sure to also check the
manuals included with any other product accessories that you may use.
SAFETY AND INFORMATION SYMBOLS USED IN THIS MANUAL
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying this
product. Failure to heed these warnings or instructions may damage the
product or cause it to operate incorrectly.
This symbol indicates text of importance or special significance in the
accompanying product literature. These may be important operating
instructions or supplemental information.
This symbol draws the user’s attention to time
-saving tips and helpful
guidelines for using the product’s features.
This symbol draws the user’s attention to recommended best practices
which should be observed when installing and using the product.
