GATEKEEPER SYSTEMS S31IP CAMERA FIRMWARE UPDATE.
DN2907 S31IP Camera Firmware Update Process
P a g e
|
13
To specify an IP address, click “Use the following IP address”. Enter
the following settings:
IP address: 192.168.1.25
Subnet mask: 255.255.255.0
There is no need to change any other settings in this window. Click
OK.
You will now be on the same network as the S31IP Camera and will
be able to perform the firmware upgrade.
Windows 10.
Click the Task Bar
Click the Start Icon then click Settings
Select Network and Sharing Center. Click
on Ethernet.
In the right hand window which now
appears click on “Change Adapter
Options”.
In the window which now appears single right click on the required Local Area Connection. In the pop up
window which appears select Properties.
If you are prompted for and administrator password or confirmation, type the password or provide
confirmation.
In the windows which now appears, click on Internet Protocol 4
(TCP/IPv4)
Next click on properties.
