Gate Titan Скачать руководство пользователя страница 16

Страница: 16 / 101

Download and install GATE Control Station:

www.gatee.eu/gcs

Notice

Your Android device must support OTG technology to run GATE Control Station app.

Connect the USB-Link to PC, MAC or smartphone using USB cable.

Notice

The dedicated GATE ‘Micro-USB Cable for USB-Link’ has the same connectors

on both sides. However, it is very important to which end of cable you
connect the USB-Link and smartphone. It will not work reversely.

Notice

If your USB-Link cannot be detected, please follow

instructions from GATE Control Station screen.

USB-Link

has a 4-colour LED indicator.

BLUE (glowing)

The USB-Link is connected to a PC or smartphone. TITAN is not connected or a
PC driver is not installed. You can download the driver here:

www.gatee.eu/drivers

BLUE (blinking)

The USB-Link does not have an installed firmware. Please install the firmware.

Содержание Titan






































































































Результаты поиска

Содержание Titan

Отзывы:

Gate Titan, Руководство пользователя, Страница: 16 / 101

Результаты поиска

Содержание Titan

Отзывы: