GAT HULL SHIELD, Руководство по установке

Страница: 10 / 11

CONTROLLER INTSALLATION GUIDE
10 / C o n t r o l l e r I n s t a l l a t i o n G u i d e - V e r s i o n 2 0 . 2
Step 4 - Connect Cables to the Controller Module
Be sure that the controller module is
OFF prior to connecting any cables.
The switch located at the top of the
unit must be in the OFF position.
Connect the transducer cables to available
inputs on the bottom of the controller
module. Twist the blue locking ring
clockwise onto the threads to secure the
connectors.
DO NOT OVER-TIGHTEN!
Connect the power cable by inserting into
the socket located on the right side of the
controller module. Be sure that the cable is
firmly pressed into the socket.
SWITCH OFF!