Gastrorag CM-1290B, Инструкция по эксплуатации

Страница: 9 / 28

EN
9
Using your coffee maker
6. Press the “On/Off” button. The “On/Off” indicator will illuminate
red, the display will indicate “12:00” and brewing process will
begin.
NOTE: During the brewing process, the “Prog”, “Hour” and
“Min” buttons are disabled.
7. The brewing process can be interrupted at any time by pressing
the “On/Off” button. To resume the brewing process, press the
“On/Off” button again.
NOTE: You can take out the carafe, pour and serve at any time.
The appliance will stop dripping automatically. But the time
cannot exceed 30 seconds.
8. When the brewing is finished (about 1 minute after the coffee
stops dripping) remove the carafe and pour the coffee out.
NOTE: The volume of coffee will be less than the volume of
water you added, as some water will be absorbed by coffee
grounds.
9. Once the brewing is finished, the coffee maker will enter the
keep warm mode for 2 hours. After that it will automatically
turn off the warming plate, while the display will show the
current time.
If you want to cancel the keep warm mode, remove the power
plug from the outlet.
10. Always turn the appliance off and remove the plug from the
outlet when not in use.
NOTE: Be careful while pouring the coffee out, because it is hot
and you may get scalded.
DELAY FUNCTION
If you do not want the coffee maker to start operation immediately,
you can use the delayed start function. For example, the current
time is 8:10, but you want the coffee maker to start the brewing at
13:00. First, follow the steps 1-5 of the previous section. Then set
the delayed start: